The Or-Tec Headworks combines two (or three machines) in one. Fitted directly at the inlet of the WWTP this unit completely pre-treats the plant influent. The unit first screens, washes and compacts the influent wastestream. It can be provided with 2mm - 6mm perforations (or 0.25 - 2mm wedgewire for industrial wastes). The screened wastestream is then treated for removal of grit & sand down to 200 microns (.007"). The grit is elevated and can be washed prior to disposal.  The unit can also be provided with an optional oil and grease (FOG) removal system which uses compressed air to aid with flotation and skimmers to remove the oil and grease for collection and disposal.

The Headworks is constructed of Stainless Steel AISI 304 or AISI 316

The screws can be constructed of AISI 304 or AISI 316 stainless steel or epoxy coated micro alloy steel

The Or-Tec Headworks features include:

• Total self-contained headworks system
• Flanged connections provide easy installation
• Stainless Steel construction
• Replaces entire plant headworks
• Self-cleaning screen, grit, and oil and grease removal system
• Completely enclosed
• Unit can be provided without Oil & Grease removal system if required
• Available with heat tracing and insulation
• Minimizes onsite concrete work

Applications:

• WWTP Headworks
• Septage Receiving Stations

Capacity:

Up to 2,370 gpm (3.4 mgd) with a single unit depending on model, size and wastestream.

Model:

• OHW2: Screening, compacting and washing, and Grit & Sand removal
• OHW3: Screening, compacting and washing, Grit & Sand, and Oil & Grease removal